Dyno Results Dyno Shootout: Battle between Dinan and RD Sport for 4.6 Liter Stroker Motor Bragging Rights
Vital Statistics
  • Vehicle / Motor
  • Dyno Type
  • Dyno Correction
  • Download Dyno Files
BMW E9x M3 (S65 Motor)
Dynojet
SAE (J1349)
Download-1
Configuration / Modifications:
  • Both CAT Delete
  • Akrapovic GT4 Race Exhaust
  • ESS Tuning ECU
  • 91 Octane (US), 95 Octane (RON)
  • Dual Clutch Transmission
Measured Results:
  • Torque
  • Horsepower
272 FT/LBS
379 HP
@ 4040 RPM
@ 8320 RPM
(368.8 NM)
(384.3 PS)
(37.61 KGM)
(282.6 KW)
Dyno Graphs:
Alternate Images:
Dyno, Spark / AFR, Temperatures
Comparison of All Runs (Spark, Throttle Valve, AFR)
Other images:
Conditions for all runs
BMW Factory Connecting Rod (S65)

Car and Modifications:

  • 2013 BMW M3, Limerock Edition
  • Akrapovic GT4 Exhaust
  • Both CAT Delete
  • ESS ECU Tune
  • 91 Octane
  • DCT

Conditions (Dynojet Weather Station):

  • Temperature:: 72.45 degrees F
  • Atmospheric pressure: 29.93 inHg
  • Humidity: 36%
  • Density Altitude:  1026  Ft.
  • SAE Correction: 0.979
  • STD Correction:  1.006
  • Uncorrected: 1.000

Results:

  • SAE Corrected: 379whp @ 8320 RPM, 272wtq @ 4040 RPM
  • STD Corrected: 389whp, 279wtq
  • Uncorrected: 387whp, 277wtq

Dyno Database:

Individual Dyno Results:

Individual dyno results are shown below.  SAE corrected results are shown twice, using two different sources.  The first source (djc) are the SAE corrected results straight from the Dynojet.  The second source (sae) of SAE corrected results are obtained by using the Kestral 4500 weather station data for each individual dyno run and running it through an independent SAE correction formula.  This ensures that the dyno results are accurate and can be independently audited and verified for authenticity and accuracy.

The legend below has the following meaning:

  • Dyno Run:  Dyno run file
  • Timestamp
  • Temp(F) = Temperature (Farenheit)
  • RelH = Relative Humidity
  • Pressure(Hg) = Barometric Pressure
  • DA(ft) = Density Altitude
  • IAT = Intake Air Temperature
  • Oil(F) = Oil Temperature (Farenheit)
  • O2(F) = Water Temperature (Farenheit)
  • WHP(unc) = Uncorrected wheel horsepower
  • WTQ(unc) = Uncorrected wheel torque
  • WHP(SAEd) = Dynojet SAE corrected wheel horsepower (SAE-1340 PRE-2004)
  • WTQ(SAEd) = Dynojet corrected wheel torque (SAE-1349 PRE-2004)
  • WHP(SAEk) = SAE-Adapted wheel horsepower (SAE-1349 2004+)
  • WTQ(SAEk) = SAE-Adapted wheel torque (SAE-1349 2004+)
Dyno Run Timestamp Temp(F) RelH Press(Hg) DA(ft) IAT Oil(F) O2(F) WHP(unc) WTQ(unc) WHP(SAEd) WTQ(SAEd) WHP(SAEk) WTQ(SAEk)
Run_002 10:33:42 70.00 56.60 29.83 992 89.8 206.8 185.7 385.6 277.8 377.5 272.0 379.9 273.1
Run_003 10:34:57 69.90 56.10 29.83 985 91.2 209.8 185.2 387.1 277.3 379.3 271.7 381.3 273.1
Run_004 10:36:18 69.70 56.20 29.83 968 92.8 212.5 185.0 385.1 276.6 377.0 270.8 379.2 272.4

* Entry used for the Dyno Database